Categories Toilets ME by Starck #251009
Toilet wall-mounted Duravit Rimless for SensoWash® f #251009
Design by Philippe Starck
rimless, washdown model, only in combination with SensoWash f, cUPC® listed*
Choose suitable pre-installation kit or connecting set depending on in-wall carrier selection, Wall-mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, If 2x6" carrier is used, # 005072 is mandatory for SensoWash® installation during rough-in stage, Not available with WonderGliss, In-wall tank & carrier and actuator plate required for installation / Refer to page XXX
Variants
| 1.28/0.8 gpf | 14 3/4" x 22 5/8" Inch | 55.1 lb | 2510092092 | 815.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
| Dimension | Weight | Order number | ||
|
Hardware | Ø 1/2" x 7 1/8" Inch | 0.4 lb | 006500 |
| for wall-mounted bidet and wall-mounted toilet | ||||
|
Noise reduction gasket | 0.7 lb | 005064 | |
| for wall-mounted toilet | ||||
|
Pre-installation set | 005072 | ||
| in combination with SensoWash, for in-wall carrier with horizontal support without shower toilet pre-installation/condiut pipe | ||||
|
Connecting set | 100731 | ||
| in combination with SensoWash Starck f | ||||
Suitable products
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
BIM (building information modeling) files
Instructions
Planning data
Product documentation
Series
Name
dksdsl