Categories Toilets Starck 3 #222659
Toilet wall-mounted for SensoWash® #222659
Design by Philippe Starck
/website/html/default/2100.us-en.html?p=680635

Toilet wall-mounted for SensoWash®, 222659












Top Downloads
washdown model, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included, Durafix included, cUPC® listed*
Durafix for concealed installation is included, In-wall tank & carrier and actuator plate required for installation / Refer to page XXX, Wall-mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, * Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, If 2x4" carrier is used, # 100691 is mandatory for SensoWash® installation
Color
Variants
select© 1.6/0.8 gpf |
14 5/8" x 24 3/8" Inch | 64 lb | 2226590092 | 575.00 $ * |
© 1.6/0.8 gpf |
14 5/8" x 24 3/8" Inch | 64 lb | 2226590092 | 575.00 $ * |
© 1.6/0.8 gpf |
14 5/8" x 24 3/8" Inch | 64 lb | 2226592092 | 645.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
![]() |
Connecting set | 100730 | ||
in combination with SensoWash shower-toilet seat, for in-wall carriers H=32 1/4" - 39 3/8", with conduit pipe for connection inside the tank | ||||
![]() |
Connecting set | 100691 | ||
in combination with SensoWash shower-toilet seat | ||||
![]() |
Pre-installation set | 005072 | ||
in combination with SensoWash, for in-wall carrier with horizontal support without shower toilet pre-installation/condiut pipe | ||||
![]() |
Sigma 01 flush plate, dual flush | 9 5/8" x 6 1/2" Inch | 115770 | |
for toilets, White | ||||
![]() |
Geberit in-wall tank and carrier | 19 3/4" x 3 1/8" Inch | 37.5 lb | 111798 |
for toilets | ||||
![]() |
Geberit in-wall tank and carrier | 19 3/4" x 5 1/2" Inch | 40.8 lb | 111335 |
for toilets | ||||
![]() |
Noise reduction gasket | 0.7 lb | 005020 | |
for wall-mounted toilet |
Spare parts
Suitable products
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
BIM (building information modeling) files
Instructions
Planning data
Product documentation

Series
Name
dksdsl
My Pro.Duravit
Login
E-Mail
Password
Sign up
Sign up now to take full advantage of all features available at pro.duravit
Register