Categories Toilets Starck 2 #253359
Toilet wall-mounted for SensoWash® #253359
Design by Philippe Starck
washdown model, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included, Durafix included, cUPC® listed*
Durafix for concealed installation is included, In-wall tank & carrier and actuator plate required for installation / Refer to page XXX, Wall-mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, * Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, If 2x4" carrier is used, # 100691 is mandatory for SensoWash® installation
Variants
© 1.6/0.8 gpf |
14 1/8" x 24 3/8" Inch | 63.9 lb | 2533590092 | 1,000.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long time to come.
When ordering WonderGliss please add a "1" as eleventh digit to the model number.
|
Connecting set | 100730 | ||
| in combination with SensoWash shower-toilet seat, for in-wall carriers H=32 1/4" - 39 3/8", with conduit pipe for connection inside the tank | ||||
|
|
Connecting set | 100691 | ||
| in combination with SensoWash shower-toilet seat | ||||
|
Pre-installation set | 005072 | ||
| in combination with SensoWash, for in-wall carrier with horizontal support without shower toilet pre-installation/condiut pipe | ||||
|
Sigma 01 flush plate, dual flush | 9 5/8" x 6 1/2" Inch | 115770 | |
| for toilets, White | ||||
|
Geberit in-wall tank and carrier | 19 3/4" x 3 1/8" Inch | 37.5 lb | 111798 |
| for toilets | ||||
|
Geberit in-wall tank and carrier | 19 3/4" x 5 1/2" Inch | 40.8 lb | 111335 |
| for toilets | ||||
|
Noise reduction gasket | 0.7 lb | 005064 | |
| for wall-mounted toilet | ||||
