Series D-Neo Toilets #WD1022
Toilet in-wall tank & carrier, Standard #WD1022
Item may differ from picture. Decorations and accessories are not included.
WaterSense® listed, For 2"x4" and 2"x6" wall installation, for toilets with a projection of <= 24 5/8", adjustable feet 0" - 9 1/2", SensoWash ready, mechanical front flush actuation, includes in-wall tank, marking of filling height, dual flush, insulated against condensation, Scope of delivery, HDPE wall-mounted toilet connection bend DN 90/90, PE wall-mounted toilet connection set DN 90, wall-mounted mounting rods M12, mounting hardware included, 2 bolt caps, cUPC® listed*, Load capacity = 880 lbs
* # WD1022: Complies with the following standards: ASME A112.6.2, ASSE 1002, ASME A112.1002/CSA B125.12 & ASME A112.19.5/CSA B45.15
Variants
select| 1.6/0.8 gpf, ADA compliant | 23 1/4" x 45 1/4" Inch | 35.3 lb | WD1022000090 | 545.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Installation accessories
|
Pre-installation set | 005072 | ||
| in combination with SensoWash, for in-wall carrier with horizontal support without shower toilet pre-installation/condiut pipe | ||||
Suitable products
| Dimension | Weight | Order number | ||
|
Actuator plate A1, for toilet, plastic | 8 1/2" x 5 3/4" Inch | 0.7 lb | WD5008 |
| mechanical actuation, for surface mounted installation, dual flush, mounting frame, mounting hardware included, push rods, front plate plastic |
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
BIM (building information modeling) files
Instructions
Planning data
Product documentation
Series
Name
dksdsl