Series SensoWash® Classic SensoWash® Shower-Toilets #613000
Shower toilet seat #613000
Design by Philippe Starck
Item may differ from picture. Decorations and accessories are not included.
Matches series ME by Starck, Starck 2, Starck 3, Darling New, Bento Starck Box, Slow close, Number of warm air dryer options: 4 Steps, Water position adjustment: 5 Steps, Number of spray intensity options: 3 Steps, Number of spray temperature options: 4 Steps, Water position adjustment: 5 Steps, Rearwash, Frontwash, Pulsing shower spray: Oscillating, Number of user profiles: 4, Self-cleaning function, Energy saving mode: Adjustable, Night light
Variants
select| White, Seat material type: Thermoplastic, Lid material type: Thermoplastic, Lid actuation: Automatic, Touchless, At the touch of a button, Flow rate dryer: 12 m³/h, Warm air dryer, Heated seat, Operation type: Remote control, App, Odor extraction, Decalcification function, Holiday mode, Connection voltage: 100 - 120 V, Min. frequency: 50 Hz, WaterSense: No, cUPC listed: Yes | 14 3/8 "x20 1/2 " | 11.023 lb | 613000011001300 | $ 3,000.00 * | |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Set contains
-
Two Piece Toilet#D19114
-
Two Piece Toilet#D21024
-
Two Piece Toilet#D42054
-
Two Piece Toilet#D42055
-
Two Piece Toilet#D42056
-
Two Piece Toilet#D42057
-
floor standing toilet set#D42063
-
floor standing toilet set#D42060
-
floor standing toilet set#D42062
-
floor standing toilet set#D42061
-
Two Piece Toilet#D21029
-
Two Piece Toilet#D21028
-
One Piece Toilet#D21025
-
One Piece Toilet#D19115
-
One Piece Toilet#D19116
-
One Piece Toilet#D42053
-
One Piece Toilet#D42052
-
One Piece Toilet#D42051
-
One Piece Toilet#D42050
-
One Piece Toilet#D42048
-
One Piece Toilet#D42049
-
One Piece Toilet#D16550
-
One Piece Toilet#D19117
-
One Piece Toilet#D49003
-
One Piece Toilet#D49004
Suitable products
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
Instructions
Planning data
Product documentation
Series
Name
dksdsl