Series Starck 2 Toilets #253359
Toilet wall-mounted for SensoWash® #253359
Design by Philippe Starck














































washdown model, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included, Durafix included, cUPC® listed*, WaterSense® listed
Durafix for concealed installation is included, Wall-mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, * Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, In-wall tank & carrier and actuator plate required for installation, If using in-wall tank & carrier other than DuraSystem, # 100691 is mandatory for SensoWash® installation
Variants
© Color 00, 1.6/0.8 gpf |
14 1/8" x 24 3/8" Inch | 63.9 lb | 2533590092 | 1,020.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long time to come.
When ordering WonderGliss please add a "1" as eleventh digit to the model number.
![]() |
Noise reduction gasket | Schallschutz-Set 005090 | ||
![]() |
Actuator plate A1, for toilet, plastic | 8 1/2" x 5 3/4" Inch | 0.7 lb | WD5008 |
mechanical actuation, for surface mounted installation, dual flush, mounting frame, mounting hardware included, push rods, front plate plastic | ||||
![]() |
Toilet in-wall tank & carrier, Standard | 23 1/4" x 45 1/4" Inch | 35.3 lb | WD1022 |
WaterSense® listed, For 2"x4" and 2"x6" wall installation, for toilets with a projection of <= 24 5/8", adjustable feet 0" - 9 1/2", SensoWash ready, mechanical front flush actuation, includes in-wall tank, marking of filling height, dual flush, insulated against condensation, Scope of delivery, HDPE wall-mounted toilet connection bend DN 90/90, PE wall-mounted toilet connection set DN 90, wall-mounted mounting rods M12, mounting hardware included, 2 bolt caps, cUPC® listed*, Load capacity = 880 lbs | ||||
![]() |
Connecting set | 100691 | ||
in combination with SensoWash shower-toilet seat | ||||
![]() |
Pre-installation set | 005072 | ||
in combination with SensoWash, for in-wall carrier with horizontal support without shower toilet pre-installation/condiut pipe |
Spare parts
Suitable products
Downloads
Hint:
BIM (building information modeling) files
Instructions
Planning data
Product documentation

My Pro.Duravit
Login
Sign up
Sign up now to take full advantage of all features available at pro.duravit
Register