Series Happy D.2 Toilets #222209
Toilet wall-mounted Duravit Rimless® #222209
Design by sieger design
Item may differ from picture. Decorations and accessories are not included.
Top Downloads
rimless, washdown model, Durafix included, cUPC® listed*, WaterSense® listed
* Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, Durafix for concealed installation is included, Wall-mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, In-wall tank & carrier and actuator plate required for installation
Color
Variants
select© Color 00, inside color White, outside color White, 1.6/0.8 gpf |
14 3/8" x 21 1/4" Inch | 59.1 lb | 2222090092 | 725.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Accessory for ceramics
| Dimension | Weight | Order number | ||
|
Toilet seat and cover | 6 lb | 006459 | |
| removable, hinges stainless steel, with slow close | ||||
|
Toilet seat and cover | 6 lb | 006451 | |
| removable, hinges stainless steel, without slow close |
|
Noise reduction gasket | Schallschutz-Set 005090 | ||
|
Actuator plate A1, for toilet, plastic | 8 1/2" x 5 3/4" Inch | 0.7 lb | WD5008 |
| mechanical actuation, for surface mounted installation, dual flush, mounting frame, mounting hardware included, push rods, front plate plastic | ||||
|
Toilet in-wall tank & carrier, Standard | 23 1/4" x 45 1/4" Inch | 35.3 lb | WD1022 |
| WaterSense® listed, For 2"x4" and 2"x6" wall installation, for toilets with a projection of <= 24 5/8", adjustable feet 0" - 9 1/2", SensoWash ready, mechanical front flush actuation, includes in-wall tank, marking of filling height, dual flush, insulated against condensation, Scope of delivery, HDPE wall-mounted toilet connection bend DN 90/90, PE wall-mounted toilet connection set DN 90, wall-mounted mounting rods M12, mounting hardware included, 2 bolt caps, cUPC® listed*, Load capacity = 880 lbs | ||||
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
BIM (building information modeling) files
Instructions
Planning data
Product documentation
Series
Name
dksdsl