Series Happy D.2 Washbasins #231460
Washbowl #231460 ground
Design by sieger design
Top Downloads
ground, with overflow, without faucet deck, hardware included, overflow clip Chrome included, cUPC® listed*, 23 5/8" Inch
* Complies with following standards: ASME A112.19.2/CSA B45.1
Variants
• |
23 5/8" x 15 3/4" Inch | 30 lb | 2314600000 | 540.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long time to come.
When ordering WonderGliss please add a "1" as eleventh digit to the model number.
| Dimension | Weight | Order number | ||
|
Push button drain assembly | 2" Inch | 0.8 lb | 005052 |
| for washbasins with overflow |
Suitable products
-
Vanity unit for console wall-mounted, for above-counter basin Happy D.2 Plus, for above-counter basin Happy D.2#HP4941
39 3/8" x 21 5/8" Inch -
Vanity unit for console wall-mounted, for above-counter basin Happy D.2 Plus, for above-counter basin Happy D.2#HP4971
39 3/8" x 21 5/8" Inch -
Vanity unit for console wall-mounted, for above-counter basin Happy D.2 Plus, for above-counter basin Happy D.2#HP4942 L/M/R
51 1/8" x 21 5/8" Inch -
Vanity unit for console wall-mounted, for above-counter basin Happy D.2 Plus, for above-counter basin Happy D.2#HP4972
51 1/8" x 21 5/8" Inch -
Vanity unit for console wall-mounted, for above-counter basin Happy D.2 Plus, for above-counter basin Happy D.2#HP4944 L/R
63" x 21 5/8" Inch
Downloads
Hint:
CAD files should not be used for computer-controlled (CNC) cutting of countertops and are for space-planning & room rendering purposes only. If you wish to order a cut-out template, please contact customer service at 888-DURAVIT or info@us.duravit.com
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
BIM (building information modeling) files
Instructions
Planning data
Product documentation
Series
Name
dksdsl