Series ME by Starck Toilets #216959
Toilet floorstanding for SensoWash® #216959
Design by Philippe Starck
Top Downloads
back-to-wall, washdown model, hardware included, horizontal outlet, only in combination with SensoWash, connecting elements for SensoWash with concealed connections included, cUPC® listed*
In-wall tank and actuator plate are required for installation / Refer to page XXX, * Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, 1/2" drop-ear elbow is necessary for installation (not included with delivery)
Color
Variants
select© 1.6/0.8 gpf |
14 5/8" x 23 5/8" Inch | 63.9 lb | 2169590092 | 725.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long time to come.
When ordering WonderGliss please add a "1" as eleventh digit to the model number.
|
Connecting set | 100691 | ||
| in combination with SensoWash shower-toilet seat | ||||
|
Pre-installation set | 005072 | ||
| in combination with SensoWash, for in-wall carrier with horizontal support without shower toilet pre-installation/condiut pipe | ||||
|
Vario connector set | Ø 4 3/8" Inch | 3.3 lb | 001422 |
| incl. offset | ||||
Suitable products
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
Instructions
Planning data
Product documentation
Series
Name
dksdsl